drawing number rev 1501 route 34 south farmingdale, nj 07727 title material fscm finish: all dim's in: inches (mm) 83330 this drawing and the contents herein are confidential and the sole property of dialight. reproduction of this drawing or construction of any parts within this drawing are forbidden without the written consent of dialight. .942 [ 23,93 ] .928 [ 23,57 ] dim "a" # .040 [ # 1,0] .160 [ 4,06 ] .312 [ 7,92 ] .500 [ 12,7 ] a 508 series datalamp holder c-17895 scale: 4.000 tolerances: unless otherwise specified fractions: # 1/64 decimals (.xx): # .01 decimals (.xxx): # .005 decimals (.xxxx): # .0005 angles: # 1 $ sheet 1 of 1 family table: rev ecn no revisions drn ckd app date a new release ajf klj no 12-20-10 dialight part number dim "a" terminal type collar & flange nut finish 508-7438-504 .865 [21,74] fig. 1 black anodize 508-7438-604 .865 [21,74] fig. 1 clear anodize 508-7445-504 .942 [23,92] fig. 1 black anodize 508-7445-604 .942 [23,92] fig. 1 clear anodize 508-7538-504 .834 [21,18] fig. 2 black anodize 508-7538-604 .834 [21,18] fig. 2 clear anodize 508-7545-504 .920 [23,37] fig. 2 black anodize 508-7545-604 .920 [23,37] fig. 2 clear anodize 508-8738-504 .848 [21,54] fig. 3 black anodize 508-8738-604 .848 [21,54] fig. 3 clear anodize 508-8745-504 .934 [23,72] fig. 3 black anodize 508-8745-604 .934 [23,72] fig. 3 clear anodize notes: 1. dialight part numbers: 508-74xx-504, 508-74xx-604, 508-75xx-504, 508-75xx-604, 508-87xx-504 & 508-87xx-604. 2. maximum panel thickness: .156" 3. recommended mounting hole size: .380 # .002". fig.2 - solder cup terminals fig.1 - solder blade terminals collar see table for finish flange nut, knurled see table for finish internal tooth lockwasher white nickel finish hex nut brass, white nickel finish 3/8-32 nef thread aluminum mounting bushing black anodize finish fig.3 - turret terminals
|